beautypg.com

Extron Electronics MLC 104 Plus Series Setup Guide User Manual

Page 57

background image

MLC 104 Plus Series • Software Setup

3-35

Step eighteen: launch GlobalViewer

(IP models only)

GlobalViewer is a graphical user interface that is generated by

Global Configurator (GC). When a GC file is built and uploaded

to a GlobalViewer host device, you can launch the GlobalViewer

interface by opening an Internet browser and entering the host

device’s IP address in the browser's address field.
Once the GlobalViewer interface is launched, you can monitor

and control all of the devices on your audio/video network

from the GlobalViewer host device.

To launch GlobalViewer:
1

.

Open an Internet browser.

N

Internet Explorer 6.0 or later with Active X enabled is

required.

2

.

Enter the IP address of a GlobalViewer host device in the

Address field, and press the keyboard's Enter key.

N

You may also launch the GlobalViewer interface from the

Global Configurator Upload Manager screen by clicking

the Test GV System button.