Extron Electronics MLC 104 Plus Series Setup Guide - Manual (Page 38)

MLC 104 Plus Series • Software Setup
Software Setup, cont’d
3-16
Step eleven: configure the front panel
The Front Panel tab provides a graphical representation of the
MLC's front control panel. It gives you the ability to:
• Configure the operations of the front control panel buttons
• Configure the captions and functions of the control buttons
that are displayed in the GlobalViewer interface.
Button caption
A caption can be set for each button in the front panel display.
To set a button caption:
1
. Select a control button.
2 . Enter the top caption text in Line 1 (if desired).
3 . Enter the bottom caption text in Line 2 (if desired).
In the example below Line 1: Power, and Line 2: On, are
displayed in the top and bottom fields of the selected
button.
Button tool tip
A tool tip is a descriptive line of text that is displayed in the
GlobalViewer interface when the cursor is positioned over a
button.
To set a tool tip:
1
. Select a control button.
2 . Enter the desired text in the Tool Tip field.