Extron Electronics MLC 104 Plus Series Setup Guide User Manual
Front cover, Mlc 104 plus series, Setup guide
![background image](/manuals/312119/1/background.png)
Setup Guide
68-1289-01 Rev. D
11 08
MLC 104 Plus Series
MediaLink
™
Controllers
Front cover
Back cover: checklist and contact information
............................................................................................. 3
........................................................................... 4
.................................................................................................. 5
Table of contents
Document Outline
- Front cover
- Safety Precautions
- Safety Precautions (Chinese) and FCC Class A Notice
- Table of Contents
- Ch. 1: Introduction
- Ch. 2: Hardware Setup
- Ch. 3: Software Setup
- Creating a Global Configurator Project File
- Configuring a New Device
- Step six: configure e‑mail server (IP models only)
- Step seven: configure e‑mail messages (IP models only)
- Step eight: configure contacts (IP models only)
- Step nine: assign serial device drivers
- Step ten: assign IR drivers
- Step eleven: configure the front panel
- Step twelve: configure associated control modules
- Step thirteen: create a shutdown schedule
- Step fourteen: create a lamp hour notification (IP models only)
- Step fifteen: create a disconnect notification (IP models only)
- Step sixteen: build the Global Configurator file
- Step seventeen: upload the Global Configurator file
- Step eighteen: launch GlobalViewer (IP models only)
- Testing the GlobalViewer pages
- Warranty
- Back cover:checklist and contact information