Extron Electronics ISM 482 - Manual (Page 45)

ISM 482 Integrated Scaling Matrix Switcher • Programming Guide 39
Command Function SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Tint
NOTES:
• Tint adjustments are available only for S-video and composite video inputs.
•
The X@ value specified is the output to which the adjusted input is switched.
Set a specific tint value X@ * X1) T X@ Tin X1)] Specify the tint adjustment.
Increment tint value X@ +T X@ Tin X1)] Increase the tint setting by one.
Decrement tint value X@ –T X@ Tin X1)] Decrease the tint setting by one.
View the tint value X@ T X1)] Show the tint setting.
Brightness
NOTE: The X@ value specified is the output to which the adjusted input is switched.
Set a specific brightness value X@ * X1! Y X@ Brt X1!] Specify the brightness adjustment.
Increment brightness value X@ +Y X@ Brt X1!] Increase the brightness.
Decrement brightness value X@ –Y X@ Brt X1!] Decrease the brightness.
View the brightness value X@ Y X1!] Show the brightness setting.
Contrast
NOTE: The X@ value specified is the output to which the adjusted input is switched.
Set a specific contrast value X@ * X1! ^ X@ Con X1!] Specify the contrast adjustment.
Increment contrast value X@ +^ X@ Con X1!] Increase the contrast.
Decrement contrast value X@ –^ X@ Con X1!] Decrease the contrast.
View the contrast value X@ ^ X1!] Show the contrast setting.
Horizontal size
Set a specific horizontal size X@ * X1@ : X@ Hsz X1@] Specify the horizontal size.
Increase the horizontal size X@ +: X@ Hsz X1@] Widen the picture.
Decrease the horizontal size X@ –: X@ Hsz X1@] Make the picture narrower.
View the horizontal size X@ : X1@] Show the horizontal size.
Vertical size
Set a specific vertical size X@ * X1# ; X@ Vsz X1@] Specify the vertical size.
Increase the vertical size X@ +; X@ Vsz X1@] Make the picture taller.
Decrease the vertical size X@ –; X@ Vsz X1@] Make the picture shorter.
View the vertical size X@ ; X1@] Show the vertical size.
Horizontal shift
Set a specific horizontal position X@ * X1# H X@ Hph X1#] Specify the horizontal position.
Increment right X@ +H X@ Hph X1#] Shift the picture right.
Decrement left X@ –H X@ Hph X1#] Shift the picture left.
View the horizontal position X@ H X1#] Show the horizontal position.
Vertical shift
Set a specific vertical position X@ * X1# / X@ Vph X1#] Specify the vertical position.
Increment up X@ +/ X@ Vph X1#] Shift the picture up.
Increment down X@ – / X@ Vph X1#] Shift the picture down.
View the vertical position X@ / X1#] Show the vertical position.
NOTE: X@ = Output number 1 or 2
X1) = Tint value 0 thru 255
X1! = Brightness and contrast value 0 thru 63
X1@ = Size value range depends on the resolution
X1# = Centering value range depends on the resolution
X1$ = Blanking value 000 thru 200