Extron Electronics ISM 482 - Manual (Page 22)

ISM 482 Integrated Scaling Matrix Switcher • Operation 16
Menu System Overview
Figure 17 shows a flowchart of the main menus in the menu system.
Default
Cycle
Menu
Menu
2 sec.
Power
on
2 sec.
Menu
10 sec.
Menu
10 sec. 10 sec.
Menu Next
Menu
10 sec. 10 sec.
Extron Electronics
ISM 482
Integration
Scaling Matrix
Extron Electronics
ISM 482
60-425-01
Version x . xx
Video & Audio
Configuration
Output
Configuration
User Presets
Advanced
Configuration
Exit Menu
Press Next to Exit
Figure 17. Menu system flowchart
• Menu button — Press the Menu button to activate the menu system and to scroll
through the five main menus.
• Next button — Press the Next button to move between the submenus of a selected
main menu, to activate one for viewing or configuration, and to save a selection.
Pressing the Next button during input configuration causes the current input’s number
and format type to be displayed on the LCD.
• Adjust and Adjust knobs — When a submenu is active, rotate the Adjust knob
and Adjust knob to scroll through the submenu options and select a setting. Refer to the
menu descriptions and flowcharts in this section for specific menu control explanations.
NOTES:
• If you press the Menu button while a main menu or a submenu is active, the
next main menu becomes active. For example, the display changes from the
Video & Audio Configuration main menu or the Input Configuration submenu
(a submenu of the Video & Audio Configuration menu) to the Output
Configuration main menu.
• To return to the default screens, let the switcher remain idle for 10 seconds
until the selected screen times out; or press the Menu button until the Exit
Menu appears, then press the Next button.
• From any menu or submenu, after 10 seconds of inactivity, the ISM saves all
adjustment settings and times out to the default LCD display cycle.