Extron Electronics ISM 482 - Manual (Page 41)

ISM 482 Integrated Scaling Matrix Switcher • Programming Guide 35
X@BrtX1!]
A front panel color brightness adjustment has occurred. X@ is the output number tied to the
adjusted input and X1! is the brightness variable.
X@ConX1!]
A front panel contrast adjustment has occurred. X@ is the output number tied to the
adjusted input and X1! is the contrast variable.
X@HszX1@]
A front panel horizontal size adjustment has occurred. X@ is the output number and X1@ is
the size variable.
X@VszX!@]
A front panel vertical size adjustment has occurred. X@ is the output number and X1@ is the
size variable.
X@HphX1#]
A front panel horizontal centering adjustment has occurred. X@ is the output number and X1#
is the centering variable.
X@VphX1#]
A front panel vertical centering adjustment has occurred. X@ is the output number and X1# is
the centering variable.
X@BltX1$]
A front panel top line blanking adjustment has occurred. X@ is the output number and X1$ is
the blanking variable.
X@BlbX1$]
A front panel bottom line blanking adjustment has occurred. X@ is the output number and
X1$ is the blanking variable.
X@PhsX1%]
A front panel pixel phase adjustment has occurred. X@ is the output number and X1% is the
pixel phase variable.
X@DhzX1^]
A front panel horizontal detail filter adjustment has occurred for the RGB or component
video input tied to output X@ . X1^ is the filter variable.
X@DvzX1&]
A front panel vertical detail filter adjustment has occurred for the RGB or component
video input tied to output X@ . X1& is the filter variable.
X@DvzX1&]
A front panel horizontal detail filter adjustment has occurred for the S-video or composite
video input tied to output X@ . X1& is the filter variable.
1BluX1(]
The blue-only mode has been turned on or off from the front panel for one or both outputs.
X1( is the on/off status for the either or both outputs. The leading “1” is meaningless.
1FilX1(]
The edge enhancement mode has been turned on or off from the front panel for one or
both outputs.
X1( is the on/off status for the either or both outputs. The leading “1” is
meaningless.