Extron Electronics FOX 500 DVI Tx User Guide - Manual (Page 44)

FOX 500 Tx/Rx • Reference Information
Reference Information, cont’d
FOX 500 Tx/Rx • Reference Information A-10 A-11
Pass-through ...................... 1 RS-232, 3.5 mm captive screw connector,
5 pole (3 pins are used) (rear panel);
in parallel with 1 RS-232, 2.5 mm mini
stereo jack (front panel)
Baud rate and protocol
Control ................................ 9600 baud, 8 data bits, 1 stop bit, no parity
Pass-through ...................... 9600 to 115,200 baud
Serial control pin configurations . Captive screw connectors: 1 = Tx, 2 = Rx,
3 = GND
Mini stereo jack: tip = Tx,
ring = Rx, sleeve = GND
Program control ............................. Extron’s control/configuration program
for Windows ®
Extron’s Simple Instruction Set (SIS ™ )
General
Power .............................................. 100 VAC to 240 VAC, 50-60 Hz, 11 watts,
internal
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Cooling ........................................... Convection, vented left to right, vents on
side panels
Mounting
Rack mount ........................ Yes, with optional rack shelf kit
Furniture mounting holes Yes, with optional under desk mounting
kit
Enclosure type ............................... Metal
Enclosure dimensions ................... 1.7" H x 8.7" W x 9.5" D
(1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 24.1 cm D)
(Depth excludes connectors and knobs.)
Product weight .............................. 2.3 lbs (1.0 kg) per unit
Shipping weight ............................ 4 lbs (2 kg) per unit
Vibration ......................................... ISTA 1A in carton
(International Safe Transit Association)
Regulatory compliance
Safety ................................... CE, CUL, FDA Class 1, UL
EMI/EMC .......................... CE, C-tick, FCC Class A, ICES, VCCI
MTBF ............................................... 30,000 hours
Warranty ......................................... 3 years parts and labor
N All nominal levels are at ±10%.
N Specifications are subject to change without notice.
Part Numbers
FOX 500 part numbers
The FOX 500 units are available in singlemode (SM) and
multimode (MM) models:
N The FOX 500 (RGB) units are available as a paired set
and as individual units.
The FOX 500 DVI units are available as individual
units only.
FOX 500 Models Part number
FOX 500 (RGB) Tx/Rx SM (set) 60-746-02
FOX 500 (RGB) Tx SM (individual unit) 60-746-12
FOX 500 (RGB) Rx SM (individual unit) 60-746-22
FOX 500 Tx/Rx (RGB) MM (set) 60-746-01
FOX 500 Tx (RGB) MM (individual unit) 60-746-11
FOX 500 Rx (RGB) MM (individual unit) 60-746-21
FOX 500 DVI Tx SM (individual unit) 60-859-12
FOX 500 DVI Rx SM (individual unit) 60-859-22
FOX 500 DVI Tx MM (individual unit) 60-859-11
FOX 500 DVI Rx MM (individual unit) 60-859-21
Included parts
These items are included in each order for a FOX 500 Tx/Rx:
Included parts Part number
IEC power cord
Tweeker (small screwdriver)
FOX 500 Setup Guide
Captive screw 5-pole connectors (qty. 6)
Extron Software Products Disk
(FOX Extender Program)
(2) 10' LC-LC duplex patch cables
(SM or MM, depending on the model)