Remote control, cont’d – Extron Electronics FOX 500 DVI Tx User Guide User Manual
Page 38

FOX 500 Tx/Rx • Remote Control
Remote Control, cont’d
4-26
FOX 500 Tx/Rx • Remote Control
4-27
5
.
Click Tools > Update Firmware. The Extron Firmware
Loader appears (figure 4-17).
Figure 4-17 — Open window
a
. Click Browse. The open file window appears.
b
. Navigate to the folder where you saved the firmware
upgrade file. Select the file. The Firmware Loader
returns to the top.
N
Valid firmware files must have the file extension “.BIN”.
Any other file extension is not a firmware upgrade for
your FOX 500.
c
. Click Upload. The File Loader reports, "This process
could take several minutes. Please wait...
" and then
displays a progress indicator bar that shows the status
of the upload.
d
. When the Firmware Loader reports, "Transfer complete!",
click the Exit button.
6
.
Cycle the FOX 500 unit's power.
7
.
If necessary, repeat this entire procedure on the other unit
of the transmitter/receiver pair.