Xylem 6-Series Multiparameter - Manual (Page 364)

Specifications Appendix O
YSI Incorporated Environmental Monitoring Systems Operations Manual O-1
APPENDIX O SPECIFICATIONS
SONDE SPECIFICATIONS
6600V2-2 SONDE
Available Sensors Temperature, Conductivity, Rapid Pulse Dissolved Oxygen, pH, ORP,
Ammonium, Nitrate, Chloride, and Depth (shallow, medium, deep, shallow
vented). Two total optical sensors (ROX Optical DO, Turbidity, Chlorophyll,
Rhodamine WT, BGA-PC, BGA-PE). Note that Rapid Pulse and ROX DO
sensors cannot be activated simultaneously.
Operating Environment Medium: fresh, sea, or polluted water
Temperature: -5 to +50  C for most sensors
Depth: 0 to 656 feet (200 meters)
Storage Temperature: -40 to +60  C for sonde and all sensors except pH , pH/ORP, ISE and optical
sensors
-10 to +60  C for pH, pH/ORP, ISE, and optical sensors
Material: PVC, Stainless Steel
Diameter: 3.5 inches (8.9 cm)
Length: 19.6 inches (49.8 cm) with no depth, 21.6 inches (54.9 cm) with depth
Weight: 7 pounds (3.18 kg) with depth and batteries but no added bottom weight
Computer Interface: RS-232C, SDI-12
Internal logging
memory size: 384 kilobytes (150,000 individual parameter readings)
Power: 8 C-size Alkaline Batteries or External 12 VDC
Battery Life: Approximately 75 days at 20 C at a 15 minute logging interval, and temperature,
conductivity, pH/ORP, Rapid Pulse DO with a 60-second DO warm up time, and
two optical probes other than ROX DO active. Approximately 70 days at 20 C at
a 15 minute logging interval, with temperature, conductivity, pH/ORP, ROX
Optical DO, and one other optical probe active. Battery life is heavily dependent
on sensor configuration and is given above for a typical sensor ensemble. If you
have a different sensor configuration, set up your sonde for a deployment in the
Run|Unattended menu and check the projected approximate battery life.
6600EDS V2-2 SONDE
Available Sensors Temperature, Conductivity, Rapid Pulse Dissolved Oxygen, pH, ORP, and Depth
(shallow, medium, deep, shallow vented). Two total optical sensors (ROX Optical
DO, Turbidity, Chlorophyll, Rhodamine WT, BGA-PC, and BGA-PE). Note that
Rapid Pulse and ROX DO sensors cannot be activated simultaneously.
Operating Environment Medium: fresh, sea, or polluted water