B&B Electronics APXN-Q5428 - User Manual - Manual (Page 64)

B&B Electronics, Inc. AirborneM2M™ User Manual
64 1/9/2014
Serial Port 2 Settings
URL /Configuration/Serial Port 2 Settings
Description Configures the serial port settings on the secondary serial port.
Field CLI Command
Serial CLI Default Mode serial-default-p2
Serial Port Bit Rate bit-rate-p2
Parity parity-p2
Data Bits data-bits-p2
Stop Bits stop-bit-p2
Flow Control flow-p2
Serial Assert serial-assert-p2
Input Buffer Flush Size input-size-p2
Serial Escape Mode esc-mode-serial-p2
Wireless LAN CLI Escape Mode esc-mode-lan-p2
Escape String esc-str-p2
Serial Interface Type intf-type

Serial port 2 cannot run in RS-485 mode and will assume RS-422 mode even if it is set
to RS-485 mode. Serial port 2 cannot run half duplex and must have a 4 wire
connection.