B&B Electronics APXN-Q5428 - User Manual - Manual (Page 40)

B&B Electronics, Inc. AirborneM2M™ User Manual
40 1/9/2014
Step Description
Optional
Press Reload [Button]
Reloads the Express Settings page. Select this if you have
further configuration options to change.
Optional
Press Restart [Button]
Restarts the device. After the device is rebooted it will attempt
to authenticate to the configured network. As long as the
network is in range the wireless interface will connect.
If the network is using DHCP an IP address will be assigned to
the WLAN interface and IP connectivity is possible over the
WLAN network.
If the network is using static IP addresses it will be necessary to
configure the network interface. See the next step.
The web interface supports advanced configuration of the device through the additional
pages. The following sections provide guidance on how to use these pages for specific
configurations.