B&B Electronics APXN-Q5428 - User Manual - Manual (Page 51)

AirborneM2M™ Users Guide B&B Electronics, Inc.
1/9/2014 51
Step Description
Feature Link
Select Serial Port 2 Settings
The wireless interface and security must be
configured before configuring the Ethernet
settings.
You will see a page showing the serial port
configuration. You may set the default
mode of operation for the serial interface on
this page.
Select Serial CLI Default Mode Select Pass from the drop down menu.
Press Commit [Button] Saves changes to the device.
Optional
Press Reload [Button]
Reloads the Serial Port 2 Settings page.
Select this if you wish to change additional
configuration options.
Optional
Press Restart [Button]
Restarts the device. After the device has
rebooted it will attempt to authenticate to
the configured network. As long as the
network is in range the wireless interface will
connect.
Once authenticated to the network the
device will attempt to make a TCP
connection with primary target server, using
the configured port number.