B&B Electronics APXN-Q5428 - User Manual - Manual (Page 28)

B&B Electronics, Inc. AirborneM2M™ User Manual
28 1/9/2014
11.0
Using the Web Interface
AirborneDirect ™ Device Servers and Wireless Adapters include a web interface that
provides access to module status, parameter modification and certificate and
configuration file management. To use the web interface follow the steps outlined in
section “Error! Reference source not found" to establish the IP address of the module.
After you know the IP address you can open a web browser and enter the IP address of
the module in the URL window.
The web interface currently supports Internet Explorer v6.0 thru 9.0, Firefox v3.x+, Opera
v9.6+, Chrome v4.0+ and Safari v5.0.5+.
When the authentication request is returned enter username “dpac” and password
“dpac”.
Figure 4 - Website Login
Username: dpac
Password: dpac
After successfully authenticating with the module, you will be logged into the web server.
If this is the first time you have accessed the device the Express Setup page will be
displayed. See section 12.0 for configuration of the device using this page. If you have
previously configured the device the default home page will be displayed (See Figure
5).From here you can update device settings if required. A quick overview of the web
interface follows.