B&B Electronics VESR4X4 - Manual - Manual (Page 43)

Section 4 - Configuring the Serial Server Vlinx VESR4x4 Serial Server
Page 43 of 70
www.bb-elec.com/
www.bb-europe.com/
Figure 40. Advanced Configuration - Forcing Connections Closed
To close a network connection if no data is received from the network for
a period of time
1. Select the I want to close a connection when data is not received on that
connection for a period of time checkbox
2. Type the desired time period (in seconds) into the text box.
To close a connection if no data is received by the serial port for a period
of time
1. Select the
I want to close all connections when data is not received by
the serial port for a period of time checkbox.
2. Type the desired time period (in milliseconds) into the text box.
Configuring when data packets are sent
1. Select the
I want to control when data packets are sent over the network
checkbox.
The Character Count , Forced Transmit , Intercharacter Timeout ,
Delimiter 1 , Delimiter 2 and Delimiter Removal configuration boxes
appear.