B&B Electronics VESR4X4 - Manual - Manual (Page 33)

Section 4 - Configuring the Serial Server Vlinx VESR4x4 Serial Server
Page 33 of 70
www.bb-elec.com/
www.bb-europe.com/
3. Click Save .
Setting up IP Addressing
On the Network Configuration page you can configure the serial server to use
dynamic (DHCP) or static IP addressing on the network.
Figure 28. Network Configuration Page
Setting up Dynamic IP Addressing
1. Select the I want to use DHCP to setup the network check box.
Setting up Static IP Addressing
1. Ensure the
I want to use DHCP to setup the network
box is un-checked.
Figure 29. IP Address Settings
2. Type the
IP Address
,
Subnet Mask
and
Default Gateway
addresses in the
appropriate boxes.