B&B Electronics VESR4X4 - Manual - Manual (Page 31)

Section 4 - Configuring the Serial Server Vlinx VESR4x4 Serial Server
Page 31 of 70
www.bb-elec.com/
www.bb-europe.com/
Logging In
You can log in to any serial server listed in the Server Information Table.
To log in:
1. Select the row associated with the desired serial server. The Login page
appears.
2. Type the password into the Password box. The default password is blank.
Figure 25. Login Page
3. Click Login .
The General Configuration page appears.
Navigating the Configuration Pages
There are two ways to move from page to page in the Vlinx Manager
Software: by clicking a specific link, or by clicking
Next
or
Back
to move
through the pages sequentially.
Note: Always remember to click Save before leaving a page to ensure your settings are saved.