Cobalt Digital COMPASS 9229-QS Quad-Split Video Processor - Manual (Page 50)

5-8 •••• Appendix A. DashBoard Menus 9229-QS User Manual •••• (V 1.2)
Ethernet
The Ethernet tab enables you to set up ethernet communications on the 9229-QS.
Table 5.4 Ethernet Tab Items
Menu Item Parameter Description
Static
User manually supplies the Ethernet Setup
settings
Method
DHCP*
Automates the assignment of the Ethernet
settings
IP Address ##.#.#.### The IP Address for the card
Subnet Mask ###.#.#.# The subnet mask for the card
Default Gateway ##.#.#.#
The gateway for communication outside of the
local area network (LAN)
Apply Changes
Applies and saves any changes made to the
Ethernet Settings
Cancel
Cancels any setting changes and resets the
Ethernet Settings to the previous values
OK Ethernet communications for the card are valid
Link Down
Ethernet communications for the card are
invalid. The ethernet cable may be disconnected
from the rear module or the network may be
down.
Ethernet Status
No IP Address
The following conditions are occurring:
• The Method is set to DHCP .
• The ethernet cable connected to card rear
module is securely connected.
• A valid IP Address is no longer available. The
DHCP server may be down or is still powering
up after a loss of power.
Ethernet
MAC Address (read-
only)
##:##:##:##:##:## The MAC Address for the card