Cobalt Digital COMPASS 9229-QS Quad-Split Video Processor - Manual (Page 33)

9229-QS User Manual •••• (V 1.2) Configuration •••• 3-9
Loading the Factory Defaults
If required, the card menu parameters can be reset to the factory default values using the option
available in the Load/Save tab.
Note —Ethernet settings, reference input selection, and the output formats are not
reset using this method.
Use the following procedure to reset the card to the factory default configuration in DashBoard:
1. Display the Device tab of the card by double-clicking its status indicator in the Basic
Tree View.
2. Display the Load/Save tab as follows:
• From the Device tab, select the Config tab.
• Select the Load/Save tab located at the bottom of the Config tab.
3. From the Global Settings area, click Load Factory Defaults to display the Confirm
dialog.
4. Press Yes to load the factory default values for all menu parameters, or No to cancel the
load and close the dialog.
This completes the procedure for resetting the card to the factory default configuration in DashBoard.