Cobalt Digital COMPASS 9229-QS Quad-Split Video Processor - Manual (Page 22)

2-8 •••• Installation 9229-QS User Manual •••• (V 1.2)
2. Connect the appropriate input and output sources to the BNC connectors on the Rear
Module. You do not need to terminate the Loop BNC(s) if you are not setting up a
looping application.
3. To use an external reference source other than the Frame Ref 1 and Frame Ref 2:
• Connect the reference input source to REF IN BNC (item 112 in Fig. 2.6).
• Configure JP7 to for the 75ohm termination on the local reference. Refer to the
section “Card Overview” for details.
This completes the procedure for connecting video input and output cables to the Rear Module.