Cobalt Digital COMPASS 9229-QS Quad-Split Video Processor - Manual (Page 10)

1-2 •••• Introduction 9229-QS User Manual •••• (V 1.2)
Overview
The 9229-QS takes four SDI input streams and can reduce them into four quadrants in a single stream.
The 9229-QS has four SDI outputs which can be independently configured to display either the full-
screen input or the Quad Split stream. When the output is showing full-screen, all HANC and VANC
data, including the embedded audio data on the input is carried through to the output. When the output
is showing Quad Split, all HANC and VANC data, including embedded audio, is stripped.
In addition, the RM20-9229-C Rear Module was designed to be used with the 9229-QS to loop its
inputs to a system, such as the CrossOver® production switcher, for a multi-viewer application.
GPI control allows external devices to choose which of the input selections, including the Quad Split,
will be assigned to the outputs.
Features
The following features are included for the 9229-QS:
• Compliance with SDI SMPTE 292M (1.485Gbps) and SMPTE 259M (270Mbps)
• Multi-Definition support of popular formats such as 1080i, 720p, 480i, 576i, 1080PsF
• Assign any input, or Black, to any quadrant
• Text overlay to name the four input sources in the Quad Split
• Configure GPIs to trigger any of the outputs or a specific quadrant
• Specify how the input signal timing is reported (relative to the reference or the output)
• Four passive looping inputs
• User selectable card analog reference
• Report status and configuration remotely via the DashBoard Control System™
• Ethernet 10/100 Mbit connectivity for easy upgrades in the field
• Independent Proc-Amp control on outputs
• Full DashBoard control and monitoring
• Fully compliant with openGear specifications and installs in the 8300 series frames
• 5 year transferable warranty