VEGA VEGACOM 558 Ethernet - Manual (Page 5)

VEGACOM 558 Ethernet 5
Product description
1.3 Technical data
Power supply
Operating voltage U
nom
= 24 V AC (20 … 53 V), 50/60 Hz or
= 24 V DC (20 … 72 V)
Power consumption approx. 4 VA
Fuse 1 A, slow-blow
Electrical connection
Component multiple plug acc. to DIN 41 612, series F
48-pole (d, b, z) with coding holes
Module in carrier
BGT 596 or BGT LOG571
suitable multipoint connector acc. to DIN 41 612
with connection via standard technologies
Housing type 505 via screw terminals max. 1 x 1.5 mm 2
Indicating elements
LEDs in front plate
- on (green)
operating condition
- ! (red) failure indication
- Ethernet (green/red) status Ethernet (linked, TX, RX)
- 1 (green/red) save indication
- 2 (green/red) status LOGBUS
- 3 (green/red) status DISBUS
Measured data input DISBUS
Data transmission DISBUS (digital data transmission)
Connection cable connection via 48-pole multipoint connector
2-wire standard cable (screened)
Max. cable length 1000 m
Measured data input LOGBUS
Data transmission LOGBUS (digital data transmission)
Connection cable connection via bus plug
RS 232 interface on front plate
Interface standard RS 232C
Cable length max. 15 m
Transmission rate in baud 9600, 19200, 38400, 57600
Transmission format 8 data bits, 1 stop bit, no parity
Plug in the front plate SUB-D plug connector, 9-pole, pins