VEGA VEGACOM 558 Ethernet - Manual (Page 16)

16 VEGACOM 558 Ethernet
5.2 IP address
If the instrument is to be connected to the network, it must have an IP
address for identification on the net. As default, VEGACOM 558 has IP
address
192.168.200.200 .
Generally, the system administrator assigns a unique IP address for
each network participant. To assign this address on VEGACOM 558,
move to the configuration window of VEGACOM (here it doesn’t matter if
a serial or a network connection exists). There you click the register
Ethernet Port . In the fields, you enter the IP address and a host name,
if necessary also the subnet mask and DNS server addresses. Make
sure that the host name does not contain special or blank characters.
The baud rate can remain at Autodetect. Then you have to
Save . With
Quit (push twice) you return to the VVO main window.
Configuration of VEGACOM 558