VEGA VEGACOM 558 Ethernet User Manual
Page 41
![background image](/manuals/261076/41/background.png)
VEGACOM 558 Ethernet
41
- rel.csv:
Includes the switching status of all relay outputs or
contact inputs (only with VEGAMET) of the measurement loop
including all card numbers for VEGALOG or DISBUS addresses
for VEGAMET configured in the VEGA processing system con-
nected to VEGACOM 558.
Example plot on VEGALOG:
#VERSION: 1.0
#FROM: COM558_Mast
#DATE: 05.07.2001 10:14
#FIELDS: Card;R1;R2;R3;R4;R5;R6;R7;R8;R9;R10
01;-;-;-;-;-;-;-;-;-;-
02;-;-;-;-;-;-;-;-;-;-
03;-;-;-;-;-;-;-;-;-;-
04;-;-;-;-;-;-;-;-;-;-
05;-;-;-;-;-;-;-;-;-;-
06;-;-;-;-;-;-;-;-;-;-
07;0;0;0;0;0;0;0;0;0;0
Note:
Only the "own" contact inputs will be displayed. If a
VEGAMET uses the inputs of another VEGAMET, these status will
not be shown in the CSV file.
After sending the mails, a status message (confirmation) is made if
the mails are received by the mail server. When clicking the link
Diagnostic buffer
, you will see details on sent emails.
Independent of automatic sending of emails, it is always possible to
manually send a message with the current measured values. To do
this, click the link
Submit mail.
VEGACOM 558 as web server