VEGA VEGACOM 558 Ethernet - Manual (Page 12)

12 VEGACOM 558 Ethernet
Configuration of VEGACOM 558
5 Configuration of VEGACOM 558
The configuration of the instrument is done with the adjustment software
VVO (VEGA Visual Operating), version 2.8 or higher, and can be real-
ised via the standard serial interface or Ethernet connection. Connect
VEGACOM 558 to the PC (as described in chapter "4.1 Ways to con-
nect"). Start VVO and choose
Planning .
Enter in each of the following fields (name and password) vega and
then choose mode Direct cable connection .