TROY Group MICR_IRD 9050 Security Printing Solutions User’s Guide - Manual (Page 85)

Section 4 Using the TROY Printer Utility
Security Printing Solutions User’s Guide -- Document #50-70410-001 Rev. D
4-39
Verifying PCL 5e
Communication The PCL Security/Barcode Font Demonstration pages can be used to verify PCL 5e communication between the
host computer and TROY printer. If the PCL 5e communication between the host computer and TROY printer is
successful, then the demonstration page should print out exactly as shown in the example on the next page.
T O PRINT THE PCL S ECURITY /B ARCODE F ONT DEMONSTRATION PAGE :
NOTE: TROY Secure EX series printers must have the printer keylock switch set to
“Print MICR” to enable printing of the PCL Security/Barcode Demonstration pages.
NOTE: TROY IRD 9050 1
UP series printers must have the 100-sheet multipurpose tray
installed to use standard-size forms for printing test and demonstration pages.
1. From the Main Window, click on the printer you wish to access.
2. Type in the current administrator password in the password box at the bottom of the Main Window. If a
password is not set, then leave the password box blank.
3. From the Main Window, click on File, Print, and then click on PCL Security/Barcode Font Demo. The
printer will automatically print the PCL 5e Security/Barcode Font Demonstration pages (refer to the example
on the next page).