TROY Group MICR_IRD 9050 Security Printing Solutions User’s Guide - Manual (Page 19)

Section 2 Understanding TROY’s Features
Security Printing Solutions User’s Guide -- Document #50-70410-001 Rev. D
2-5
Pre-defined
Security States The following table describes the general pre-defined security states built into TROY Security Printing Solutions.
) TROY MICR / IRD Secure EX Printers Only
Security Printing Solutions Feature Required Security State
(MICR Printers)
Required Security State
(MICR Secure Printers)
Print TROY E13-B MICR font
Print TROY CMC-7 MICR font
MICR mode enabled
MICR toner cartridge installed
MICR mode enabled
TROY MICR toner cartridge installed
Valid user login (if previously set up)
Valid PIN entered for Softlock (if enabled)
Keylock switch set to Print MICR )
Print TROY Convenience Amount fonts N/A Valid user login
Access TROY Auxiliary fonts (Data Capture, OCR,
AutoProtect ™ , Messaging, Microprint, Security, etc.)
N/A Valid user login
Access signatures, fonts, logos, forms, and macros
stored in the secure memory area of the printer N/A Valid user or administrator login
Access signatures, fonts, logos, forms and macros stored
in the public memory area of the printer
(No security requirements) (No security requirements)
Use the TROYmark ™ feature for the background image
on your checks
N/A (No security requirements) )
Encrypt MICR print data sent to your MICR printer over a
network N/A Encryption and decryption passwords
must be the same
Add or delete a printer user name and password N/A Valid administrator login
Print an audit report N/A Valid user or administrator login