TROY Group MICR_IRD 9050 Security Printing Solutions User’s Guide - Manual (Page 158)

Appendix IRD 9050 1
UP
Printer Setup Guidelines
S Security Printing Solutions User’s Guide -- Document #50-70410-001 Rev. D
A-4
Loading IRD
Paper Stock
Loading
Preprinted IRD
Paper Stock
IRD forms must be loaded into the printer with the bottom edge of the document (the edge where the MICR line
is printed) oriented toward the front of the printer paper tray (Figure 3 and Figure 4). Failure to load the return
IRDs as described will cause the IRD forms to jam in the printer.
If you are using preprinted IRD security paper stock, the paper should be loaded into the printer in accordance
with how your IRD printing application is setup to print IRD documents. It is recommended that you first print a
test page to verify the correct orientation for loading preprinted IRD paper stock into the printer. In either case,
the top edge of the IRD form should be oriented toward the back of the paper tray.
Figure 3 Figure 4
Return IRD
perforation
Top edge of IRD form
Bottom edge of IRD form