TROY Group MICR_IRD 9050 Security Printing Solutions User’s Guide - Manual (Page 67)

Section 4 Using the TROY Printer Utility
Security Printing Solutions User’s Guide -- Document #50-70410-001 Rev. D
4-21
Implementing the
Secure Seal
Feature (cont.)
The following additional seal options can be enabled or disabled to suit the requirements of the print job.
Seal Option Enabled (checked) Disabled (unchecked)
Use Metadata Seal data will use the available metadata
tags and data, which are overlaid on top of
the current defaults (Printer Utility settings)
and data specified. All data capture fields
(except “Custom” fields) can be used for the
metadata tags. Seal data will use only the defaults (Printer
Utility settings) and data specified. Default
values for all fields except Resolution X and Y
are blank. A default template is not provided.
Auto Apply Each Page Seal print event is triggered by an end-of-
page event (must be used with the “Use
Metadata” option enabled) Seal print event is triggered via data command.
Use Location Seal prints at the specified X, Y location. Seal prints at the current location on the page
(cursor location).
Display Error (default
enabled) Seal processing errors are displayed on the
printer control panel. Seal processing errors are not displayed on the
printer control panel (silently ignored).