Ohaus CT Series ELECTRONIC BALANCE - Manual (Page 71)

30
Parts Counting Error Level Parts Counting Error Level Parts Counting Error Level Parts Counting Error Level Parts Counting Error Level
The parts counting error level is based on
the resolution (readability) of the particular
model balance and sample weight. The
adjacent table lists error levels that you
can choose from.
To view, change or disable the parts count-
ing error level:
1. Access the PCErr submenu.
2. Press to display the current set-
ting.
3. Press to change the setting.
4. Press to accept the displayed
setting, when released, PCErr will be
displayed again.
ERROR LEVELS ERROR LEVELS ERROR LEVELS ERROR LEVELS ERROR LEVELS
OFF OFF OFF OFF OFF Disables error level limits. Disables error level limits. Disables error level limits. Disables error level limits. Disables error level limits.
1 % ±1 % acceptable error.
2.5 % ±2.5 % acceptable error.
5 % ±5.0 % acceptable error.