Ohaus CT Series ELECTRONIC BALANCE - Manual (Page 59)

18
Linearity Calibration Linearity Calibration Linearity Calibration Linearity Calibration Linearity Calibration
1. Press and hold until CAL is
displayed, then release. Balance will
display SPAN.
2. Press and the display will show
LIN.
3. Press . When released, C 0g
will be displayed, indicating that no
mass should be on the platform.
4. Press . The display will show
-C- followed by the value of the mass
which must be placed on the plat-
form.
5. Place the required mass on the plat-
form.