Ohaus CT Series ELECTRONIC BALANCE - Manual (Page 63)

22
Display Weighing Units and Modes Display Weighing Units and Modes Display Weighing Units and Modes Display Weighing Units and Modes Display Weighing Units and Modes
Indicator Indicator Indicator Indicator Indicator
g grams grams grams grams grams
oz ounces
ozt troy ounces
dwt pennyweight
lb pounds
t taels
• custom unit
pc parts counting
Unit Selection Unit Selection Unit Selection Unit Selection Unit Selection
The Unit Selection submenu permits you
to specify which weighing units and oper-
ating modes will be enabled for use dur-
ing operation. The adjacent table lists the
units and modes available on Portable
Advanced balances.
1. Access the Sel submenu.
2. Press , the display will show
the grams unit indicator (g) along
with the current status (ON/OFF).
3. Press to change the status.
4. Press to accept the displayed
status, when released, the display
will show the next unit indicator along
with the current status.
5. Set each unit or mode ON or OFF as
in steps 3 and 4.
Taels Taels Taels Taels Taels
If taels are enabled, you will be required
to choose one of three different taels:
Hong Kong, Singapore, or Taiwan.
1. When the display shows TAEL 1,
press to change to another tael
if desired.
2. Press to accept the displayed
tael.
Taiwan
Hong Kong
Singapore