Ohaus CT Series ELECTRONIC BALANCE - Manual (Page 36)

5
Fr. 0 Fr. 0 Fr. 0 Fr. 0 Fr. 0
START 7 STOP STOP
BIT DATA BITS BIT BIT
Fr. 1 Fr. 1 Fr. 1 Fr. 1 Fr. 1 START 7 EVEN STOP
BIT DATA BITS PARITY BIT BIT
Fr. 2 Fr. 2 Fr. 2 Fr. 2 Fr. 2
START 7 ODD STOP
BIT DATA BITS PARITY BIT BIT
Fr. 3 Fr. 3 Fr. 3 Fr. 3 Fr. 3 START 7 EVEN STOP STOP
BIT DATA BITS PARITY BIT BIT BIT
Fr. 4 Fr. 4 Fr. 4 Fr. 4 Fr. 4
START 7 ODD STOP STOP
BIT DATA BITS PARITY BIT BIT BIT
Fr. 5 Fr. 5 Fr. 5 Fr. 5 Fr. 5 START 8 STOP
BIT DATA BITS BIT
Fr. 6 Fr. 6 Fr. 6 Fr. 6 Fr. 6
START 8 ODD STOP
BIT DATA BITS PARITY BIT BIT
Fr. 7 Fr. 7 Fr. 7 Fr. 7 Fr. 7 START 8 EVEN STOP
BIT DATA BITS PARITY BIT BIT
Fr. 8 Fr. 8 Fr. 8 Fr. 8 Fr. 8
START 8 STOP STOP
BIT DATA BITS BIT BIT
Press the UNITS button repeatedly until the desired frame number is displayed.
Then press the TARE button to select the displayed frame number.
When the TARE button is released, “rS232” will be displayed and the Print submenu
is returned.
3. Once the baud rate is entered, the
Display will change to show the cur-
rent frame format selection. This will
be the letters “Fr” followed by a number from 0 to 8.
The number corresponds to one of the following data frames: