Ohaus CT Series ELECTRONIC BALANCE - Manual (Page 68)

27
Averaging Level Averaging Level Averaging Level Averaging Level Averaging Level
Averaging level compensates for vibra-
tion or excessive air currents. During op-
eration, the balance continually takes
weight readings from the weighing cell.
Successive readings are then digitally pro-
cessed to achieve a stabilized display.
Use this submenu to specify how much
processing you need to obtain stable re-
sults.
NOTE NOTE NOTE NOTE NOTE: Averaging level does not affect
balance accuracy.
Select one of three averaging levels using
the adjacent table as a guide.
To view or change the averaging level:
1. Access the AL submenu.
2. Press to display the current set-
ting.
3. Press to change the setting.
4. Press to accept the displayed
setting, when released, AL will be
displayed again.
AVERAGING LEVEL AVERAGING LEVEL AVERAGING LEVEL AVERAGING LEVEL AVERAGING LEVEL
AL 0 Reduced stability, fastest
stabilization time.
AL 1 AL 1 AL 1 AL 1 AL 1 Normal stability, normal Normal stability, normal Normal stability, normal Normal stability, normal Normal stability, normal
stabilization time
stabilization time stabilization time stabilization time stabilization time.....
AL 2 More stability, slow
stabilization time.