Operation – Ohaus CT Series ELECTRONIC BALANCE User Manual

Page 51

Low Battery Indicator

Parts Counting Indicator

Weighing Unit Indicators

Stability Indicators

Weigh Below Hook

A weigh below hook is provided with mod-
els CT200, CT600 and CT1200 for below
balance weighing applications.

To install the hook, turn the balance over
holding the platform in place. Screw the
hook into the platform shaft from the bot-
tom of the balance. Tighten finger-tight.
Mount the balance on a suitable surface or
stand which permits below balance weigh-
ing.

Turning the Balance On and Off

With no load on the platform, press

All segments of the display will turn on,

then the software version is displayed.

The display will momentarily blank and

then indicate zero.

NOTE:

NOTE: Allow at least 5 minutes for the

balance to temperature stabilize before

using. If the balance is moved to a differ-

ent temperature environment, allow addi-

tional time to stabilize.

To turn the balance off, press and

hold

until OFF is displayed, then

release it.

OPERATION

Weigh Below Hook