Ohaus CT Series ELECTRONIC BALANCE - Manual (Page 46)

5
INTRODUCTION INTRODUCTION INTRODUCTION INTRODUCTION INTRODUCTION
This manual covers installation, operation and troubleshooting for the OHAUS ®
Portable Advanced Electronic Balances, Models CT10, CT200, CT600, CT1200 and
CT6000. To ensure proper operation of the balance, please read this manual
completely.
DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION
The Ohaus Portable Advanced balances are precision weighing instruments, de-
signed to provide years of service with virtually no maintenance. The Portable
Advanced housing is constructed of a material which is impact resistant, contains a
one piece solid-state precision electronics PC board, and a five digit LCD display which
is 0.5 inches in height. All Portable
Advanced balances are initially factory set to
measure in grams and can be set to measure in other units of measure as desired.
Each balance operates through a series of menus which enable precise calibration and
the selection of various parameters which enhance operation. A built in lock switch
prevents calibration settings from being changed. Power is supplied through an AC
adapter or batteries. Accessories include: an RS232 Interface Kit which allows printing
of results through an external computer or printer, security device, calibration masses,
scoops and carrying cases. See accessory section.
Portable Advanced Balance