Ohaus CT Series ELECTRONIC BALANCE User Manual

Page 50

Model CT200 Shipping Bracket

The Model CT200 is factory packed
with a shipping bracket which must be
removed before installing the Platform.

Using the hex key provided, re-
move the screw which secures
the bracket to the transducer.

Slide the bracket out to remove it.

BRACKET

CAUTION:

CAUTION: DO NOT ATTEMPT TO
REMOVE THE DOWN STOP
ADJUSTMENT SCREW.

REMOVE SMALLER SCREW

(TURN COUNTERCLOCKWISE)

Platform Installation

On the CT10 and CT6000 models, the
platform is installed before shipment
(CT10 platform is removable, CT6000
platform is not). On all other models,
the platform must be installed on top of
the balance by inserting the shaft of the
platform into the hole in the weighing
mechanism.

The CT10 is equipped with a draft
shield which fits over the platform.

NOTE:

NOTE: The CT10 draft shield and gem
cup should be wiped with the antistatic
towelette supplied with the balance to
eliminate any static buildup.