Ohaus CT Series ELECTRONIC BALANCE - Manual (Page 60)

19
6. Press . The display will show
-C- momentarily, then C followed by
the next mass to be placed on the
platform. Do not disturb the balance
when -C- is displayed. Disturbances
will result in improper calibration.
7. Place the required mass on the plat-
form, then press . The display
will show -C- while the balance reca-
librates. When the mass on the plat-
form is displayed along with the cur-
rent unit indicator, the balance is reca-
librated.
End End End End End
If you have entered the Calibration menu
and do not wish to calibrate the balance,
use END to return to normal weighing
operations.
1. Repeately press until END is
displayed.
2. Press . When released, the bal-
ance will returned to normal weighing
operations.