beautypg.com

Changing the set value, Figure 9, Front view of the temperature regulator – M&C TechGroup CSS-M Operator's manual User Manual

Page 20

background image

20

Gas sampling and gas conditioning technology

4-2.1.3-ME

Figure 9

Front view of the temperature regulator


16.1

CHANGING THE SET VALUE

For changing the set value, you must press the P-button < 2s. The set value adjusted at the factory at
5°C is shown. With both arrow keys, the set value can be set upwards or downwards. However, this
value should not be adjusted below +1°C, otherwise you must expect a freezing up of the heat
exchanger. If you set the value above the ambient temperature, the cooler will not work.



See also other documents in the category M&C TechGroup Equipment: