M&C TechGroup ECP20-2 Operator's manual - Manual (Page 9)

9
Gas sampling and gas conditioning technology 3-1.10-ME
8 TECHNICAL DATA
Electric Gas Cooler ECP Type ECP20-1 Type ECP20-2
Sample outlet dew point range of adjustment: +2 °C ..... +15 °C, factory setting: +5 °C
Dew point stability at const. conditions: < ±0,1°C
Sample inlet temperature **max. 180°C
Sample inlet dew point **max. 80°C
Gas flow rate **max.250l/h **max.500l/h
Number of heat exchangers 1 2
Material of heat exchangers Duran glass or PVDF or stainless steel 316
Ambient temperature **+5°C up to +40°C
Stockage temperature -20 to +60°C
Admissible gas pressure max. 3bar g. with glass and PVDF
max. 10bar with stainless steel
Total cooling capacity at 25°C a.t. 50KJ/h 80KJ/h
Dead volume/heat exchanger approx. 80cm 3
Sample gas connection glass: for tube Ø6mm, PVDF/SS316: G1/4“i
Condensate connection glass: for tube Ø12mm, PVD F/SS316: G3/8“i
Ready for operation < 20 minutes
Mains power supply switch 230V 50Hz or 115V 60Hz,(±10%)
Power consumption 150VA 250VA
Electrical connection terminal 2,5mm 2 , cable glands 2 X PG11
Status alarm contact rating 250V, 2A, 500VA, 50W alarm point
 
3°C to T
soll
Electrical protection Fuse 2 x 4A
T
Case protection IP 54 (EN 60529)
Method of mounting surface mounting
Casing dimensions (HxWxD) 210mm X 385mm X 226mm
Wight 10Kg 12,5Kg
Electrical equipment standard EN 61010
* Standard,
** Maximum values in technical datas must be rated in consideration of total cooling capacity at 25 °C
ambient temperature and an outlet dew point of 5 °C.