M&C TechGroup ECM Series Operator's manual - Manual (Page 8)

8
Gas sampling and gas conditioning technology 3-3.0-ME
8 TECHNICAL DATA
8.1 FOR BASIC COOLER ECM WITHOUT HEAT EXCHANGER
Gas cooler series EC

version ECM-1 version ECM-2
Part No. 02K7500 (a)** 02K7510 (a)**
Number of heat exchanger
possibility prepared for 1 stream prepared for 2 streams
Sample outlet dewpoint range of adjustment: +2 °C ..... +7 °C, factory setting: +5 °C
Dew point stability at const. conditions: < ±0,1°C
Sample inlet temperature ***max. +180°C
Sample inlet dew point ***max. +80°C
Gas flow rate ***max. 250l/h ***max. 2x150l/h
Ambient temperature +10°C to +50°C
Storage temperature -20 to +60°C
Total cooling capacity 40W at 10°C - 50°C ambient temperature
Ready for working < 15 min
Power consumption max. 200VA (start up current at 230V=2,5A; at 120V=4,5A)
Main power connection 240V/120V, 50Hz/60Hz (a):-15%/+10%
Electrical connections terminals: 6-12mm , cable gland: 2xM20x1,5
Status alarm 1 free configurable status alarm with 2 potential free change-over
contacts, alarm point: < 2°C and > 8°C
contact rating 250VAC, 2A; 500 VA; 50W
Electrical safety EN EN 61010
CAN/CSA-C22.2 No.61010.1-04
UL Std. No. 61010-1(2 Edition)
System of protection IP20 (EN 60529)
Case colour RAL 9003
Method of mounting wall mounting
Dimensions
Weight 270 x 270 x 316mm (WxHxD)
12kg/13,5kg (version: 230V/115V)
8.2 OPTIONS FOR BASIC COOLER ECM
Heat exchanger type ECM-1G ECM-1PV ECM-1SS ECM-2G ECM-2PV ECM-2SS
Part No 93K0140 93K0170 93K0160 97K0100 97K0110 97K0115
Material of heat
exchanger Borosilicate
glass PVDF st. steel
316Ti Borosilicate
glass PVDF st. steel
316Ti
Max. gas flow rate 250Nl/h 250Nl/h 250Nl/h 150Nl/h 150Nl/h 150Nl/h
Sample gas pressure
abs. max. 2bar
(3bar)
1
max. 3bar max. 10bar max. 2bar
(3bar)
1
max. 3bar max. 10bar
Sample gas connection GL18
for Ø6mm
a.d. tube* G1/4“i G1/4“i
oder 1/4“
NPT** GL18
for Ø6mm a.d.
tube* Tube
Ø6mm* Tube
Ø6mm*
Condensate connection GL25 for
Ø12mm tube*
Ø8mm or
Ø10mm** G3/8“i G3/8“i o.
3/8“NPT** GL25 for
Ø12mm tube*
Ø8mm or
Ø10mm** G3/8“i G3/8“i o.
3/8“NPT**

P at max. flow 1mbar 1mbar 1mbar 1mbar 1mbar 1mbar
Stagnant space approx. 100ml 100ml 100ml 40ml 25ml 30ml
Peristaltic pump SR25.2 1 pc. incorporated in the cooler, compl. installed, part no.: 01P9125; cooler weight
plus 0,6kg per pump
the sample gas pressure is limited to 2bar absolute
* Standard, other version on request 1 with GL connecting adapter
** Option
*** Maximum values in technical data must be rated in consideration of total cooling capacity at 25 °C ambient temperature and an outlet dew
point of 5 °C.