M&C TechGroup SP 30-H.._EX2 Operator's manual - Manual (Page 15)

15
Gas sampling and gas conditioning technology 2-1.9.6EXMD
15 MAINTENANCE
W A R N I N G !
The safety instructions specific to the plant and process are to be
consulted prior to any maintenance work!
D A N G E R !
Caution, danger of explosion!
Under voltage do not take the device off the mains !
W A R N I N G !
When working during operation:
High surface temperatures!
Touching the surfaces can result in burns. Wear protective gloves
and protect against unauthorized access !
W A R N I N G !
Work on the gas sample probe may only be carried out when the
environment has been declared an explosion-free zone, i.e. it is
free of explosive atmospheres.
The requirements of VDE 0100 and its associated standards and
regulations must be observed when erecting and servicing high-
voltage power installations with rated voltages to 1000V !
16 CLEANING
N O T E !
In case of external contamination of the connection box and the
temperature controller housing clean these only with a cloth
wetted with soapy water.