M&C TechGroup SP 30-H.._EX2 Operator's manual - Manual (Page 10)

10
Gas sampling and gas conditioning technology 2-1.9.6EXME
10 TECHNICAL DATA
Serie SP
®
SP30-H1.1/EX2 SP30-H2/EX2 SP30-H1.1-V/EX2
Temperature sensor Fe-CuNi PT100 2-wire Fe-CuNi
Temperature controller external
Probe tube length L1 max. 1 m
Sample temperature depending on the temperature class (see table temperature class). Please
specify with order.
Operating temperature depending on the temperature class (see table temperature class). Please
specify with order.
Pre-filter optional optional V20-2/30 insitu filter
length 520 mm,

60
mm, filter porosity 2 μm,
integrated and heated
Sample gas inlet
connection G3/4"i DIN ISO 228/1 pre-filter with G1 1/2"i
DIN ISO 228/1
Dust loading max. 2 g/m
3
>2 g/m
3
Probe tube volume 380 ml/m 420 ml
Sample pressure max. 5 bar g
Ambient temperature -20 °C to +70 °C
Storage temperature -20 °C to +70 °C
Ready for operation 2 h
Power supply 230V 50/60Hz or 115V 50/60Hz
Heating capacity 0,6m: 600W, 1m: 800W, (other length/capacities on request)
Electrical connections terminals, max. 4 mm
2
, 2x PG13,5 cable gland, terminal range 6-12mm
Electrical standard EN 61010, EN60519-1
Degree of protection IP54 EN 60529
Ex-marking II 3 G Ex nA II T5 to T2 see table temperature class
Mounting flange DN65 PN6, Form B with 4 welded screws on both sides M 12x 40 mm
Material of parts in contact
with the sample stainless steel 1.4539 1.4539,
SS316Ti/SS316
Temperature class
Operating/sampling temperature
°C Limiter
°C
T2 280 290
T3 185 190
T4 120 125
T5 85 90