EVS XTnano Version 11.01 - November 2012 Configuration Manual - Manual (Page 80)

Field Rate
Description Field frequency used (Hz).
Both field rate and resolution give the video standard.
Values 50.00 Hz (PAL) - default
59.94 Hz (NTSC)
59.94 Hz (J)
Resolution
Description Vertical resolution used (number of white-to-black and black-
to-white transitions that can be seen from the top to the bottom
of the picture) (pixel + type).
Both field rate and resolution correspond to the video standard.
With an XTnano server, SD and HD video standards can be
available if the relevant license codes are activated.
Values In SD:
• 525i
• 625i
In HD:
• 720p
• 1080i
Codec
Description Algorithm used to compress and decompress the video signal.
The codecs available on the EVS server depend on the video
standard used, as well as on the active license codes.
See section "Codec Availability" on page 72 for detailed
information on codec availability.
Values In SD:
• DVCPro 50
In HD:
• DVCPro HD
Bitrate
Description Number of megabits processed per second (Mbps).
The bitrate depends on the codec.
Values See section "Codec-Related Information" on page 72 for
detailed information on bitrates per codec,
XTnano Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 70