EVS XTnano Version 11.01 - November 2012 Configuration Manual - Manual (Page 137)

3.6.4. Downconverted Outputs Settings
Introduction
The Downconverted outputs settings allow specifying the settings related to the
downconverted output lines and the downconverter parameters.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Monitoring tab.
• in the Technical menu of the Remote Control Panel (T4.2).
The following screenshot presents the settings page of the Monitoring tab in the server-
based application and highlights the Downconverted outputs settings area.
Char OUT J4
Description Specifies the monitoring output type generated on the J4
connector.
Values • SD
• HD
Default value System dependent
Char OUT J1
Description Specifies the monitoring output type generated on the J1
connector.
Value • CVBS
127 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.A