EVS XTnano Version 11.01 - November 2012 Configuration Manual - Manual (Page 179)

Internal loop mode
Description Defines which components of PGM1 output must be recorded
back into the server when the Loop mode is engaged.
Values The following values are possible:
• Video + Audio:
Both video and audio signals of PGM1 are recorded back
into CAM A input..
• Video only:
Only the video signal of PGM1 is recorded back into CAM
A input. This allows the operator to continue the record of
live audio tracks during the Loop process. This can be
useful to add music, voice or live sound to an edit for
example.
Default value Video + Audio
Note
In audio embedded, the audio is always looped, whether the loop mode is set to
Video + Audio or Video only.
169 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.A