EVS XTnano Version 11.01 - November 2012 Configuration Manual - Manual (Page 19)

# Name of area Description
4. Configuration
Summary This area shows a summary of the server parameters
for the configuration line selected in the Configuration
Lines area.
The summary displays the following information:
1. codec type - bitrate - video standard
2. based config - INs/OUTs - No. audios
3. server name - server type
5. Task bar The Task bar (Server-based application) displays
commands for the main actions in the window.
See section "Navigability and Commands" on page 9
for more information.
5'. Status bar The Status bar (web-based interface) displays:
• the Multicam Setup application status
• the date and time of the last refresh
• the Refresh button
6. Server Information This area displays the following information on the EVS
server:
• genlock status (OK or bad)
• timecode and timecode status (OK or bad)
• IP address of the LAN PC
2.1.2. Navigability and Commands
In the Server-Based Application
General Navigability
The following table presents the general commands to navigate in the Multicam Setup
window:
Command description Command key
Moving the cursor to the first item of the Tools menu F9
Moving the cursor to the first configuration line ESC
Moving down in the list of editable items
(configuration lines and Tools commands) TAB
Moving up in the list of editable items SHIFT+TAB
Displaying a Help window that gives a summary of
the commands F1
9 2. Multicam Setup
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.A