EVS XTnano Version 11.01 - November 2012 Configuration Manual - Manual (Page 177)

Recall clip toggle
Description Enables/disables the selection of the camera of a clip through
the Function keys: Pressing several times the F_ key browses
to CAM A, CAM B, CAM C, CAM D, CAM E and CAM F.
Values Yes / No
Default value Yes
Record key
Description Changes the function of the RECORD key on the Remote
Panel, as described below.
Values The following values are possible:
• Start REC+Live:
Pressing the RECORD key starts the record process and
switches to LIVE mode.
• Live:
Pressing the RECORD key only switches to last recorded
picture, but the record is not restarted if it has been
previously stopped by the operator.
Default value Start REC+Live
167 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.A