EVS XTnano Version 11.01 - November 2012 Configuration Manual - Manual (Page 122)

Timecode Insertion Settings
Introduction
The Timecode Insertion settings allow the management of VITC or ANC timecodes
channel by channel.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Channels tab, in the advanced display mode:
◦ on page 7, 8 or 9 on the server-based application.
◦ on page 1 on the web-based interface.
The following screenshot shows the Timecode Insertion settings in SD on page 9 of the
Channels tab in the server-based application:
The screenshot below shows the Timecode Insertion settings in HD.
XTnano Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 112