EVS XTnano Version 11.01 - November 2012 Configuration Manual - Manual (Page 174)

3.9.9. EVS Controller Settings
Introduction
The EVS Controller settings gather:
◦ Settings related to the behavior of the keys, lever or jog of the Remote Panel.
Warning
Most of the settings are only available or applicable with base configurations
associated to the use of an EVS Remote Panel (Nano Remote).
These fields are available in the following interfaces:
• in the Multicam Configuration window, Operation tab, in the basic display mode:
◦ on page 4 on the server-based application.
◦ on page 1 on the web-based interface.
• in the Operational setup menu of the Remote Control Panel (9.X).
The following screenshot presents page 4 of the Operation tab in the server-based
application, where the EVS Controller settings are available:
Effect duration for take
Description Defines the duration of the transition when using the TAKE
key to chain 2 sequences in PGM+PRV mode.
Values Range of values: 00s00fr to 20s00fr.
Default value 00s05fr
XTnano Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 164