ZyXEL Communications Prestige P-870HW-51a v2 - Manual (Page 93)

Chapter 7 Wireless LAN
P-870HW-51a v2 User’s Guide
93
7.8 The Advanced Setup Screen
To configure advanced wireless settings, click Network > Wireless LAN >
Advanced Setup. The screen appears as shown.
Figure 47 Wireless LAN > Advanced Setup
The following table describes the labels in this screen.
Table 25 Wireless LAN > Advanced Setup
LABEL DESCRIPTION
RTS/CTS
Threshold Enter a value between 0 and 2432.
Fragmentatio
n Threshold This is the maximum data fragment size that can be sent. Enter a value
between 256 and 2432.
Number of
Wireless
Stations
Allowed Specify the maximum number (from 1 to 64) of the wireless stations that
may connect to the ZyXEL Device.
Output Power Set the output power of the ZyXEL Device. If there is a high density of APs
in an area, decrease the output power to reduce interference with other
APs. Select one of the following 20%, 40%, 60%, 80% or 100%.
Multicast
Rate Select a data rate at which the ZyXEL Device transmits wireless multicast
traffic.
If you select a high rate, multicast traffic may occupy all the bandwidth
and cause metwork congestion.